RIO I/O Interface Board

The RIO is a low cost Input/Output interface board. It provides the following features. . .

RIO (Standard Configuration)

• 10 NPN outputs.
• Ribbon cable or discrete wire.
  
• 8 Inputs, can be used in Digital or Analog mode.
  
• MODBUS based.
  • Multiple RIO's can be used in one system.
• Place out on machine tool to minimize wiring.
• DIP switch selects MODBUS address.
• Powered via conductors in modbus cable.
  
• LED's show power-up diagnostic information.   
  

RIO-ADC (With Analog to Digital Converters)

• Standard Configuration Options, Plus...
• 4 Analog outputs
• 0-10VDC
• 8 bit DAC
• 8 Analog inputs
• 0-24VDC
• 8 bit DAC