THE M3568 advanced MOTION CONTROLLER

Mid-sized coordinated motion projects such as CNC’s, Delta Robots, or Polar Robots are handled readily with the high performance M3568 Advanced Motion Controller, which is Ethernet-enabled, includes integrated I/O and on-board high-capability stepper motor drives.  Users can directly connect four NEMA 17, 23, or 34 stepper motors, each assigned to either of four axis of motion and energized by high-capacity drives.  The multiple EIA communications ports connect operator interface devices, a hand-held pendant, or other similar ancillary equipment.

key features:

  • Up to Four (4) Axis of Motion, with On-Board Motor Drives
  • Advanced, uCito-based Processing and Motion Control Functionality
  • Ethernet Connectivity
  • Two (2) EIA Communication Ports
  • Seven (2+3+2) Discrete Outputs
  • Thirteen (11+2) Discrete Inputs
  • One (1) Analog Input

Supported motion:

  • Coordinated Motion
  • Linear, Circular, and Smooth-Curve Interpolation
  • Linear and S-Curve Accelerations

Drives and Axis of Motion:

  • Four (4) Motor Drive Connections
  • Each of Four (4) Selectable Logical Axis Include:
    • Each is software configurable from 1.0 to 5.0 Amps
    • 16-64 level Microstepping(up to 12,800 steps per rev on 1.8 degree motor)
    • Main Bus Over-Voltage & Under-Voltage Protection
    • Over Temperature Protection
    • Phase-to-Phase & Phase-to-Ground Short Circuit Protection
    • Each drive can be software linked to any of the four axis of motion.
    • Directly runs NEMA 17, 23 or 34 frame stepper motors
    • Diagnostics, for Testing Wiring and Motors
    • Active air flow assures cooling; (external discharge recommended)

Inputs and outputs, on-board Industrial:

Outputs:

  • Two (2) Discrete PNP Outputs, 24VDC
  • Three (3) Discrete NPN Outputs (Two w/PWM Capability)
  • Two (2) Mechanical Relay (Dry Contacts)

inPUTS:

  • Eleven (11) Discrete Inputs for PNP Sources
  • Two (2) Discrete Inputs for NPN Sources
  • One (1) 10-bit 0-6VDC Analog Input

Emergency Stop Application

  • Two (2) Emergency Stop Inputs
  • Pendant-Mounted Emergency Stop Button
  • One (1) Dry-Contact Output Terminal, for Emergency Stop Loop
The M3521 Advanced Motion Controller

Communications:

  • Ethernet TCP/IP -- 10/100 MHz
  • Two EIA-232 Host Ports
    • Keypad / Pendant Interface
    • Host Interface
  • Two threads of MODBUS® Compatible Communications via EIA-485

Software Support:

The M3568 can be programmed and driven by a wide variety of languages, including very elementary ones like BASIC. Or, the unit can be programmed with a specifically designed, commercial-off-the-shelf package in ExtraTech’s powerful Coreo platform.  Among other features, Coreo allows easy programming of coordinated motion, multiple types of interpolation, and sophisticated accelerations.

Other:

  • Dimensions: 17.8 x 12.8 x 5.5cm (7 x 5 x 12.2in)
  • Separate Power Inputs:
    • 24VDC for operations and I/O
    • 24-85VDC for motor drives

Specialty connections:

  • Motor Drive Headers -
    • Inputs / Outputs:
      • One (1) Step and Direction
      • One (1) “Enable” Output
      • One (1) “Fault” Input
    • Communications
      • MODBUS® Compatible
      • Proprietary: Teknic® or Yaskawa®

 

If you're an OEM searching for a motion controller of a caliber seen on this page, have an annual usage of over 100 units, and are seeking a relationship with a trusted supplier with more than 25 years industry experience, please feel free to contact us let us know if there’s something that we can do for you.