THE RPC353 Remote Processor Core

The new ExtraTech®  RPC353 core is an upgraded processor that will allow for a greater range of versatility. This new processor is Linux® based and multi-thread; it has greater speed and twice the memory.  It also includes 10/100 Ethernet and USB capabilities. This processor is used in all of ExtraTech's next generation motion controllers.

Custom control system designers can tap the capabilities of an optimized central processor resource with the RPC353 Remote Processor Core.  Supporting your application with a powerful, highly stable,  and compact Linux® based operating system, you’ll have the latitude to tailor your control system to address your unique requirements.  It also includes 10/100 Ethernet and USB capabilities, video connector & driver, a vector floating point unit, a clock calendar chip, and 64x64MB of active memory.  This platform is indeed the central horsepower designed and used by ExtraTech Systems for all of our motion controllers, and it’s now available as a stand alone product for those OEM’s interested in developing their own system.

key features:

  • Linux® Based Operating System
  • Freescale (NXP) iMX35.3 Processor @ 532MHz
  • 64MB DDR2 RAM, 64MB NOR Flash
  • 10/100 Ethernet and USB
  • Vector Floating Point
  • Time-of-Day, Calendar
RPC353.jpg
 

CENTRAL PROCESSOR:

  • Freescale (NXP) iMX35.3 Processor Running at 532MHz
    • ARM1136JF-S Core
    • Vector Floating Point Unit
  • System Environment
    • 64MB DDR2 RAM
    • 64MB NOR Flash
    • Thre (3) UARTs
    • Clock/Calendar IC
    • 512 BytesNVRAM
    • 10/100 Ethernet Magnetics Included
  • Altera Cyclone III 3C16
    • 15,408 Logic Elements
    • Three (3) Chip-Selects from Processor
    • Five (5) Interrupts to Processor
      • Configured by Processor
    • 230 FPGA I/O to Daughterboards via Two Mezzanine Connectors
    • Eight (8) Exposed Test Points
  • Dual 140 Pin Mezzanine Connectors
    • 230 Pins of FPGA I/O
    • Dual UARTs
    • 10/100 Ethernet — Ready for RJ45 Jack
    • Ethernet Activity LEDs
    • Four Processor GPIO to Daughterboard
    • Voltage, 3.3V, Supplied by Daughterboard
  • Video Connector (Top Side)
    • Direct TFT Driver for High Speed Graphics (not video; distance limited)
      • 18bit or 24bit RGB
    • USB 2.0 Adapter(s) for Memory Stick Expansion, Touch Screen Interface, etc.
    • Alternate UART Signal

 

 

If you're an OEM seeking a central processor of a caliber seen on this page, have an annual usage of over 100 units, and are seeking a relationship with a trusted supplier with more than 25 years industry experience, please feel free to contact us let us know if there’s something that we can do for you.